Join us at Hillhead 2024! Read more ->

Two Piece Fittings

Two Piece Fittings

SAFETY & FLEXIBILITY WITH VOSS HOSE FITTINGS 

Hydraulic systems are only as efficient as each individual component. So VOSS Fluid places the same high demands on the quality of its hose fittings as on the rest of the range. This is true for their leakage and assembly reliability as well as their versatility and durability. The synergy between VOSS Fluid hose fittings and other VOSS coupling systems guarantees the right fit for any application.

All components and systems from VOSS are perfectly matched. Uniform values and parameters make assembly easier, more reliable and increase protection against leakage while improving the load capacity. In addition, as the standard VOSS Fluid solutions provide exemplary corrosion protection that has set the benchmark in the market and significantly increase the product service lives.

  Flexequip Logo

PRECISION

Precision-engineering solutions developed from decades of competence and expertise.

HIGHEST LEAK-PROOFING

Highest leak-proofing thanks to standardisation of system components.

ASSEMBLY

Efficient assembly reliability thanks to consistent assembly criteria.

CORROSION PROTECTION

Standard, long-service life through maximum corrosion protection with zinc-nickel coating.

VERSATILITY

Versatility with multi-variant product solutions.

FERRULES

3/16” TO 2” DIAMETER

VOSS & FLEXEQUIP FERRULES AVAILABLE FOR 3/16” UP TO 2” HOSE.

Skive and No-skive Ferrules available for different types of hose applications.

FEATURES

  • Precision-engineered solutions made from decades of expertise and know-how.
  • Perfect alignment between fittings and couplings.
  • Standard durability thanks to maximum corrosion protection with a zinc-nickel base.
  • PF11
    EN853-1ST/1SN & EN857-1SC/2SC HOSES SKIVE
  • PF12
    EN853-2ST/2SN & EN856-4SP/R12 HOSES SKIVE
  • PF13
    EN853-2ST/2SN & EN856-4SP/R12 HOSES SKIVE
  • PF15
    EN853-1SC/2SN & EN853-1SC HOSES – NO SKIVE
  • PF22
    EN853-1SN/2SN & R1AT/R2T HOSES – NO SKIVE
  • PF23
    THERMOPLASTIC EN855-R7 & R8 HOSES – NO SKIVE
  • PTC
    PTFE CONVOLUTED TAPE WRAPPED & EXTRUDED
  • PTCE
    PTFE CONVOLUTED EXTRUDED
  • PTTB
    PTFE SMOOTH BORE

BSP FITTINGS

DKR TYPE & DKOR (O-RING) TYPE

DKR are the most common type of Female fitting used in UK & Ireland.

  • Hose fittings with BSP thread and 60° taper.
  • ISO 12151-6 (ISO 8434-6).
  • Ideal for use in agricultural and standard hydraulic applications.
  • PF11
    EN853-1ST/1SN & EN857-1SC/2SC HOSES SKIVE
  • PF12
    EN853-2ST/2SN & EN856-4SP/R12 HOSES SKIVE
  • PF13
    EN853-2ST/2SN & EN856-4SP/R12 HOSES SKIVE
  • PF15
    EN853-1SC/2SN & EN853-1SC HOSES – NO SKIVE
  • PF22
    EN853-1SN/2SN & R1AT/R2T HOSES – NO SKIVE
  • PF23
    THERMOPLASTIC EN855-R7 & R8 HOSES – NO SKIVE
  • PTC
    PTFE CONVOLUTED TAPE WRAPPED & EXTRUDED
  • PTCE
    PTFE CONVOLUTED EXTRUDED
  • PTTB
    PTFE SMOOTH BORE

BANJO BOLTS BSP & METRIC

Ideal for use in Valve blocks on all medium to high-pressure hydraulic applications.

FEATURES

  • Banjo ring eye & Bolt fittings with BSP thread.
  • Banjo ring eye & Bolt fittings with Metric thread.
  • Double-eye bolts for assembling two fittings in tandem.
  • RNR
    BSP RING EYE’S FOR BANJOS
  • F15 R
    BSP BOLT FOR BAJO
  • F15
    BSP DOUBLE EYE BOLT FOR BANJO
  • RNM
    METRIC BANJOS
  • F15 M
    METRIC BOLT FOR BANJO

JIC FITTINGS

Widely used in fuel delivery and fluid power applications, especially where high pressure is required.

FEATURES

  • Hose fittings with UNF thread and 37°cone (JIC).
  • ISO 12151-5 (ISO 8434-2).
  • Sometimes referred to as – Joint Industry Council.
  • DKJ
    JIC FEMALES 74º CONE FITTINGS
  • DKJ90
    90º JIC FEMALES 74º CONE FITTINGS
  • DKJ45
    45º JIC FEMALES 74º CONE FITTINGS
  • AGJ
    JIC MALES 74º CONE – UNF FITTINGS

METRIC FITTINGS

Higher pressure resistance and functional reliability, even under extreme operating conditions.

FEATURES

  • Hose fittings with 24° taper & O-ring
  • Fit in bore type
  • W DIN 3861/ISO 434-1
  • ISO 12151-2 (ISO 8434-1)

ADVANTAGES

  • Permanent stability thanks to metallic taper coupling on the fitting body and additional soft seal.
  • Reliable over-tightening protection.
  • Reduced work effort thanks to reduced tightening distances & tightening forces.
  • Maximum tightness thanks to embedded FKM O-ring (standard).
  • Improved leak-proofing & precision seal.
  • Easy, fast and reliable installation
  • Repeat installations can be performed frequently without any issues.

DKOL METRIC LIGHT FITTINGS

  • DKOL
    METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • DKOL 90
    90º METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • DKOL 45
    45º METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • CEL
    MALES 74º DIN 3861 LIGHT
  • F15 M
    METRIC BOLT FOR BANJO

DKOS METRIC HEAVY FITTINGS

  • DKOS
    METRIC FEMALES 24º CONE DIN 3865 HEAVY WITH ‘O’ RING
  • DK0S 90
    90º METRIC FEMALES 24º CONE DIN 3865 HEAVY WITH ‘O’ RING
  • DKOS 45
    45º METRIC FEMALES 24º CONE DIN 3865 HEAVY WITH ‘O’ RING
  • CES
    MALES 74º DIN 3861 HEAVY

STANDPIPE FITTINGS

Can be used in tandem with a DIN compression fitting to connect a Steel Tube and flexible hose assembly.

FEATURES

  • Hose fittings with pipe attachment for cutting rings.
  • ISO 8434-1
  • Normally referred to as -Standpipes.
  • BEL
    STANDPIPES FOR DIN 2353 FITTINGS LIGHT
  • BEL 90
    90º STANDPIPES FOR DIN 2353 FITTINGS LIGHT
  • BES
    STANDPIPES FOR DIN 2353 FITTINGS HEAVY
  • BES 90
    90º STANDPIPES FOR DIN 2353 FITTINGS HEAVY

ORFS FITTINGS

ORFS (O-Ring Face Seal) ­fittings have a straight thread and a flat face with an O-ring groove machined in the flat face. Sealing takes place by compressing the O-ring onto the flat face of the female connector.

FEATURES

  • Exceeds SAE J1453 and ISO 8434-3.
  • Sealing takes place by compressing the O-ring.
  • Provides a connection between steel tubing and SAE J1926/ ISO 11926-1 O-Ring Ports.

ADVANTAGES

  • Reliable over-tightening protection.
  • Reduced work effort thanks to reduced tightening distances & tightening forces.
  • Maximum tightness thanks to embedded FKM O-ring (standard).
  • Improved leak-proofing & precision seal.
  • Higher pressure resistance & functional reliability, even under extreme operating conditions.
  • Easy, fast & reliable installation repeat installations can be performed frequently without any issues.
  • ORFS
    FACE SEAL FEMALE FITTINGS ISO 12151-1 (ISO 8434-3)
  • ORFS 90
    FACE SEAL 90º FEMALE FITTINGS ISO 12151-1 (ISO 8434-3)
  • ORFS 45
    FACE SEAL 45º FEMALE FITTINGS ISO 12151-1 (ISO 8434-3)
  • AORFS
    FACE SEAL MALE FITTINGS ISO 12151-1 (ISO 8434-3)

JETWASH FITTINGS

Jet washing fittings used on all high-pressure cleaning machines.

FEATURES

  • Plastic coated for ease of removal.
  • Standard M22 x 1.5 thread.
  • DKK
    JETWASH COUPLING COMPLETE
  • DKKL
    JETWASH COUPLING COMPLETE (LONG TYPE)
  • KF - KM ADAPTORS
    22MM KARCHER TO BSP FEMALE OR MALE

SAE FITTINGS

Can be used in tandem with split clamps. The split clamps make it easy to assemble the connection in close quarters.

They also make removal of the flange head component, such as the hose assembly, easy by loosening all four bolts. Due to this usage of the O-ring, flanges with O-rings has an advantage over metal to metal flanges as all-metal flanges are more prone to leakage because they must be tightened to a higher, yet narrower torque range.

FEATURES

  • Hose fittings with SAE flange
  • FL3 Standard series (3000 PSI)
  • FL6 Standard series (6000 PSI)
  • ISO 12151-3 (ISO 6162-1 and ISO 6162-2)
  • SAE J518

ADVANTAGES

  • Leak free Advantages
  • Higher pressure resistance & functional reliability, even under extreme operating conditions.
  • Ease of assembly.
  • Maximum tightness thanks to FKM O-ring (standard).
  • Reliable over-tightening protection.
  • Repeat installations can be performed frequently without any issues.

SAE 3000 PSI FLANGE FITTINGS

  • FL3
    SAE J518 FLANGES 3000 PSI FLANGE FITTINGS (CODE61)
  • FL3 90
    90º SAE J518 FLANGES 3000 PSI FITTINGS (CODE61)
  • FL3 45
    45º SAE J518 FLANGES 3000 PSI FITTINGS (CODE61)
  • FSC3
    FLANGE SPLIT CLAMPS 3000 PSI (CODE61)

SAE 6000 PSI FLANGE FITTINGS

  • FL6
    SAE J518 FLANGES 3000 PSI FLANGE FITTINGS (CODE61)
  • FL6 90
    90º SAE J518 FLANGES 6000 PSI FITTINGS (CODE62)
  • FL6 45
    45º SAE J518 FLANGES 6000 PSI FITTINGS (CODE62)
  • FSC6
    FLANGE SPLIT CLAMPS 6000 PSI (CODE62)

CAT FLANGE FITTINGS

Can be used in tandem with split clamps. The split clamps make it easy to assemble the connection in close quarters.

FEATURES

  • Hose fittings with CAT flange.
  • FLCAT High-Pressure Series (9000 PSI)
  • ISO 12151-3 (ISO 6162-1)
  • SAE J518

ADVANTAGES

  • Leak free Advantages.
  • Higher pressure resistance and functional reliability, even under extreme operating conditions.
  • Ease of assembly.
  • Maximum tightness thanks to FKM O-ring (standard).
  • Reliable over-tightening protection.
  • Repeat installations can be performed frequently without any issues.
  • FLC
    FLANGES TYPE CAT
  • FLC 90
    90º FLANGES TYPE CAT
  • FCL 45
    45º FLANCES TYPE CAT
RELATED SECTIONS
Distag QCS - Flexequip

CELEBRATING 50 YEARS WITH FLEXEQUIP

We welcome you to take a look at our new celebration catalogue, and see some of the products which will take us into next 50 years phase.
DistagQCS-Catalogues

DOWNLOAD OUR CATALOGUES

Full listing of catalogues for you to download
Hose-fittings-Interlock

INTERLOCK HOSE FITTINGS

All components and systems from VOSS are perfectly matched. Uniform values and parameters make assembly easier, more reliable and increase protection against leakage while improving the load capacity.

Complete Hydraulic System Provider

+14.000 PRODUCT LINES & 3 WAREHOUSE LOCATIONS ACROSS THE UK & IRELAND

As a leading supplier of complete port-to-port solutions, at Distag QCS Group we offer a comprehensive range of fluid power components, including tube connection systems, hydraulic hose, fittings, assemblies, kits, motors, cylinders, valves, and accessories. The range includes FLEXEPULSE hose, FLEXEQUIP and VOSS tube and end-fittings.

Celebrating 50 years in Hydraulics

Distag QCS (UK) Ltd, previously known as Flexequip Ltd, was founded in July 1971 and began manufacturing hydraulic couplings to service a large home and export market across the world through a distribution network.

The Flexequip brand has been synonymous with designing and manufacturing high-quality hydraulic couplings for over 50 years. From the early days of re-usable couplings, and braised adapters, to the current range of one & two-piece fittings, the FH logo is widely recognised across Europe, UK, and the Middle East.

Following the acquisition by the Distag group in 2006, the company has continued to expand the product range and service provided, and today we carry over 10,000 active hydraulic component SKUs, including hose, fittings, adapters, QR couplings, valves, motors, cylinders, clamps & hose protection.

In addition to the components provided, Distag also manufacture hose assemblies, manipulated steel tube assemblies, and build hydraulic kits according to customer specification.

While the name may have changed, and the product range expanded, we are proud to have some members of the team still with us today, who have been on this journey with the company for over 30 and 40 years; and witnessed the continuous development and improvement in hydraulic couplings.

We welcome you to take a look at our new celebration catalogue, and see some of the products which will take us into next 50 years phase.

TECHNICAL LIBRARY

See what our Engineers have to say

Our super talented Technical team are continuously working on simplifying techniques, providing innovative new products and providing 3D models to help our customers get what they need. Our Technical Hub will provide you with detailed information which will help you design and decide on the products you may need.

While every effort is made for you to make that decision, our Engineers are always on-hand to help.

DOWNLOAD OUR BROCHURE, GET SOME TECHNICAL HELP OR CONTACT A DISTAG ENGINEER ->
Optimized by Optimole