Compression Fittings
Tube compression fittings
Compression fittings for professional hydraulic steel tube batch production and customer replacements. Our DIN hydraulic fittings range includes VOSS Ring M, VOSS ES-4 Cutting Ring, 60° Male Stud, VOSS Form SQR, VOSS DKO, Banjo Type, Flange coupling with cutting ring, 60° to DIN fitting bulkhead, adjustable stud connectors & test points.
STUD COUPLINGS
Straight male-male stud connectors are typically used for joining two steel tube assemblies or connecting a steel tube into Valve blocks.
- CSC L-SERIESCSC STRAIGHT COUPLING L-SERIES
- CSC S-SERIESSTRAIGHT COUPLING
- CSC REDUCING L-SERIESCSC STRAIGHT REDUCING COUPLING L-SERIES
- CSC REDUCING S-SERIESCSC STRAIGHT REDUCING COUPLING S-SERIES
- CSBC L-SERIESCSBC STRAIGHT BULKHEAD COUPLING L-SERIES
- CMSBC 60º CONE BSPP L-SERIESMALE STUD BSPP 60º CONE L-SERIES
- CMSBC 60º CONE BSPP S-SERIESMALE STUD BSPP 60º CONE S-SERIES
- CMSBT L-SERIESCMSBT MALE STUD BSP TAPER L-SERIES
- CMSBT S-SERIESCMSBT MALE STUD BSP TAPER S-SERIES
- CSSABC L-SERIESCSSABC COMPRESSION STUD STANDPIPE ADJUST BS
- CSSABC S-SERIESCSSABC COMPRESSION STUD STANDPIPE ADJUST BS
60º BSP TO DIN FITTING BULKHEAD
Our 60º to DIN Bulkhead is specifically designed to fit steel tube assemblies into a Bulkhead, with the option to connect BSP fitted hose, on the opposite side of the bulkhead
- BH L-SERIESBH STRAIGHT SCREW-IN BULKHEAD L-SERIES
- BH S-SERIESBH STRAIGHT SCREW-IN BULKHEAD S-SERIES
EQUAL ELBOW DIN FITTINGS
Equal elbow male-male stud connectors are typically used for joining two steel tube assemblies.
- CEE L-SERIESCEE EQUAL ELBOW COUPLING L-SERIES
- CEE S-SERIESCEE EQUAL ELBOW COUPLING S-SERIES
ADJUSTABLE ELBOW BULKHEAD CONNECTORS
Adjustable elbow male-male stud connectors with Locknut, are typically used for joining a steel tube assemblies into a power unit framework
- CEBC L-SERIESCEBC ELBOW BULKHEAD COUPLING L-SERIES
- CEBC S-SERIESCEBC ELBOW BULKHEAD COUPLING S-SERIES
ADJUSTABLE ELBOW CONNECTORS
Adjustable elbow male-male stud connectors with Locknut, are typically used for joining a steel tube assemblies into a power unit framework
- CASEO L-SERIESCASEO ADJUSTABLE SWIVEL ELBOW /O-RING COUPLING L-SERIES
- CASEO S-SERIESCASEO ADJUSTABLE SWIVEL ELBOW/O-RING COUPLING S-SERIES
DIN TYPE BANJO COUPLING
Internally relieved bolt comprises a `perforated hollow bolt and spherical union for fluid transfer
- CBCCOB L-SERIECBCCOB COMPRESSION BANJO /O-RING BSP COUPLING L-SERIES
- CBCCOB S-SERIESCBCCOB COMPRESSION BANJO /O-RING BSP COUPLING S-SERIES
TEE COUPLING DIN FITTINGS
Tee couplings come in a variety of combinations and are typically used for joining three steel tube assemblies.
- CBCCOB L-SERIECBCCOB COMPRESSION BANJO /O-RING BSP COUPLING L-SERIES
- CBCCOB S-SERIESCBCCOB COMPRESSION BANJO /O-RING BSP COUPLING S-SERIES
VOSS CUTTING RING
VOSS Ring M – VOSS ES-4 Soft Seal
The VOSS RingM cutting ring system has all the advantages of the earlier 24° cutting ring system, raising it to a new level of quality and safety.
With the ES-4 cutting ring made from steel, VOSS Fluid offers a combination metallic and elastomer seal for greatest possible leak-proofing under changing conditions.
- VOSS RINGM CCR L-SERIESCCR COMPRESSION CUTTING RING L-SERIES
- VOSS RINGM CCR S-SERIESCCR COMPRESSION CUTTING RING S-SERIES
- VOSS ES4 L-SERIESCCR COMPRESSION CUTTING RING ES4 L-SERIES
- VOSS ES4 S-SERIESCCR COMPRESSION CUTTING RING ES4 S-SERIES
VOSS NUTS
- CNM DIN L-SERIES NUTSCNM COMPRESSION NUT L-SERIES
- CNM DIN S-SERIES NUTSCNM COMPRESSION NUT S-SERIES
- CNM SQR L-SERIESCNM SQR NUT
- CNM SQR S-SERIESCNM SQR NUT
- CBPC BSPCBPC COMPRESSION BLANKING PLUG (BSP)
- CBPC METRICCBPC COMPRESSION BLANKING PLUG (METRIC)
FLANGE COUPLING WITH CUTTING RING
INTRODUCTION
TEST POINTS
VOSSPointDC are impressive integrated plastic elements provides permanently secure fixation, preventing seal caps loosening during vibrations.
- TF MBTEST POINT WITH MALE THREAD
- TF TEETEST POINT TEE FOR TUBE TO TUBE CONNECTION
- TF M L/STEST POINT FOR METRIC FEMALE SWIVEL CONNECTION
- TF M L/STEST POINT MALE x FEMALE SWIVEL TEE FOR TUBE TO THREAD CONNECTION
- TEST HOSE ASSEMBLIES
TOOLS & ACCESSORIES
Our tools and accessories have been specially developed for individual and series assembly and align perfectly with our complete system. We have the right solution for all requirements for safe and cost-effective pre-assembly in original equipment or during maintenance.
- PRE-ASSEMBLY STUDS
- MANUAL PRE-ASSEMBLY STUDS/ PRE-ASSEMBLY STUDS
- INSPECTION GAUGES
- TAPERED TEST GAUGES
- THREAD GAUGE BOARD
- TUBE BENDING DEVICE
- SAWING DEVICE
- MANUAL DEBURRER
RELATED SECTIONS
COMPLETE HYDRAULIC SYSTEM PROVIDER
VOSS PARTNERS SINCE 2013
ADAPTORS & PORTS
Complete Hydraulic System Provider
+14.000 PRODUCT LINES & 3 WAREHOUSE LOCATIONS ACROSS THE UK & IRELAND
As a leading supplier of complete port-to-port solutions, at Distag QCS Group we offer a comprehensive range of fluid power components, including tube connection systems, hydraulic hose, fittings, assemblies, kits, motors, cylinders, valves, and accessories. The range includes FLEXEPULSE hose, FLEXEQUIP and VOSS tube and end-fittings.
Celebrating 50 years in Hydraulics
Distag QCS (UK) Ltd, previously known as Flexequip Ltd, was founded in July 1971 and began manufacturing hydraulic couplings to service a large home and export market across the world through a distribution network.
The Flexequip brand has been synonymous with designing and manufacturing high-quality hydraulic couplings for over 50 years. From the early days of re-usable couplings, and braised adapters, to the current range of one & two-piece fittings, the FH logo is widely recognised across Europe, UK, and the Middle East.
Following the acquisition by the Distag group in 2006, the company has continued to expand the product range and service provided, and today we carry over 10,000 active hydraulic component SKUs, including hose, fittings, adapters, QR couplings, valves, motors, cylinders, clamps & hose protection.
In addition to the components provided, Distag also manufacture hose assemblies, manipulated steel tube assemblies, and build hydraulic kits according to customer specification.
While the name may have changed, and the product range expanded, we are proud to have some members of the team still with us today, who have been on this journey with the company for over 30 and 40 years; and witnessed the continuous development and improvement in hydraulic couplings.
We welcome you to take a look at our new celebration catalogue, and see some of the products which will take us into next 50 years phase.
TECHNICAL LIBRARY
See what our Engineers have to say
Our super talented Technical team are continuously working on simplifying techniques, providing innovative new products and providing 3D models to help our customers get what they need. Our Technical Hub will provide you with detailed information which will help you design and decide on the products you may need.
While every effort is made for you to make that decision, our Engineers are always on-hand to help.
