One Piece Fittings

One Piece Fittings

COMPATIBLE WITH ALL ONE-PIECE SWAGING MACHINES 

Pre-crimped ferrule for perfect alignment.

Distag’s new exclusive range of FLEXEQUIP one-piece fittings are designed to conform to the highest standards of quality and reliability.

Designed with a ‘short ferrule’ pattern, these one-piece fittings are compatible with all types of swaging machines, including Gates and Parker. Can also be used in the ‘Parkrimp’ system machines.

Flexequip Logo

ALIGNMENT

Perfect alignment due to ferrule pre-crimped onto the hose fitting

INSTALLATION

Easier assembly process - less opportunity for error.

SWAGING MACHINES

Can be used in almost all swaging machines.

NO 'SKIVE'

No need to ‘skive’ – no hose rubber removal.

FLEXEPULSE MATCH

A perfect match for Flexepulse hose and all hoses conforming to EN853 & EN857.

AGRICULTURAL

Highly popular in the agricultural industry for OEMs, dealers, and repair shops.

BSP FITTINGS DKR

1/4” TO 1” DIAMETER

  • DKR OPF
    BSP FEMALES 60º CONE FITTINGS
  • DKOR OPF
    BSP O-RING FEMALES 60º CONE FITTINGS
  • DKR 90 OPF
    90º BSP FEMALES 60º CONE FITTINGS
  • DKOR 90 OPF
    90º BSP ‘O’ RING FEMALES 60º CONE FITTINGS
  • DKRCFB OPF
    90º BSP COMPACT ELBOW (FORGED BALL TYPE) FITTINGS
  • DKR 45 OPF
    DKOR O-RING TYPE BSP FITTINGS
  • AGR OPG
    BSP MALE PARALLEL 60º CONE FITTINGS
  • AGRK OPF
    BSP MALE PARALLEL 60º CONE FITTINGS

JIC FITTINGS

1/4″ TO 3/4″ DIAMETER

  • DKJ OPF
    JIC FEMALES 74º CONE FITTINGS
  • DKJ90 OPF
    90º JIC FEMALES 74º CONE FITTINGS
  • DKJ45 OPF
    45º JIC FEMALES 74º CONE FITTINGS
  • AGJ OPF
    JIC MALES 74º CONE – UNF FITTINGS

ORFS FITTINGS

1/4” TO 3/4” DIAMETER

  • ORFS OPF
    FACE SEAL FEMALE FITTINGS ISO 12151-1 (ISO 8434-3)
  • ORFS 90 OPF
    FACE SEAL FEMALE 90º FITTINGS ISO 12151-1 (ISO 8434-3)
  • A ORFS OPF
    FACE SEAL MALE FITTINGS ISO 12151-1 (ISO 8434-3)

METRIC FITTINGS

1/4″ TO 3/4″ DIAMETER

  • DKOL OPF
    METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • DKOL 90 OPF
    90º METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • DKOL 45 OPF
    45º METRIC FEMALES 24º CONE DIN 3865 LIGHT WITH ‘O’ RING
  • CEL
    MALES 24º DIN 3861 LIGHT

BANJO FITTINGS

1/4” TO 3/4” DIAMETER

  • RNR OPF
    BSP RING EYES FOR BANJO FITTINGS
  • RNM OPF
    METRIC BANJOS
  • F15R
    BSP BOLT FORN BANJO
  • F15M
    METRIC BOLT FOR BANJO
RELATED SECTIONS
Distag QCS - Flexequip

CELEBRATING 50 YEARS WITH FLEXEQUIP

We welcome you to take a look at our new celebration catalogue, and see some of the products which will take us into next 50 years phase.
One-Piece Hose Fittings

ONE-PIECE HOSE FITTINGS

NEW PRODUCT LINE - Distag’s new exclusive range of FLEXEQUIP one-piece fittings are designed to conform to the highest standards of quality and reliability.
REUSABLE hose fittings

REUSABLE HOSE FITTINGS

Designed to be assembled onto Hydraulic hose systems its design leaves it the ideal product for carrying out repairs on machines working in remote areas, saving time and money

Complete Hydraulic System Provider

+14.000 PRODUCT LINES & 3 WAREHOUSE LOCATIONS ACROSS THE UK & IRELAND

As a leading supplier of complete port-to-port solutions, at Distag QCS Group we offer a comprehensive range of fluid power components, including tube connection systems, hydraulic hose, fittings, assemblies, kits, motors, cylinders, valves, and accessories. The range includes FLEXEPULSE hose, FLEXEQUIP and VOSS tube and end-fittings.

NeoTech Logo
Holmbury Logo
FlexPulse Logo

Celebrating 50 years in Hydraulics

Distag QCS (UK) Ltd, previously known as Flexequip Ltd, was founded in July 1971 and began manufacturing hydraulic couplings to service a large home and export market across the world through a distribution network.

The Flexequip brand has been synonymous with designing and manufacturing high-quality hydraulic couplings for over 50 years. From the early days of re-usable couplings, and braised adapters, to the current range of one & two-piece fittings, the FH logo is widely recognised across Europe, UK, and the Middle East.

Following the acquisition by the Distag group in 2006, the company has continued to expand the product range and service provided, and today we carry over 10,000 active hydraulic component SKUs, including hose, fittings, adapters, QR couplings, valves, motors, cylinders, clamps & hose protection.

In addition to the components provided, Distag also manufacture hose assemblies, manipulated steel tube assemblies, and build hydraulic kits according to customer specification.

While the name may have changed, and the product range expanded, we are proud to have some members of the team still with us today, who have been on this journey with the company for over 30 and 40 years; and witnessed the continuous development and improvement in hydraulic couplings.

We welcome you to take a look at our new celebration catalogue, and see some of the products which will take us into next 50 years phase.

TECHNICAL LIBRARY

See what our Engineers have to say

Our super talented Technical team are continuously working on simplifying techniques, providing innovative new products and providing 3D models to help our customers get what they need. Our Technical Hub will provide you with detailed information which will help you design and decide on the products you may need.

While every effort is made for you to make that decision, our Engineers are always on-hand to help.

DOWNLOAD OUR BROCHURE, GET SOME TECHNICAL HELP OR CONTACT A DISTAG ENGINEER ->